Alright! We were rolling right along with our four part prerequisite list for the siding project we had undertaken with little to no (okay, absolutely no) previous experience installing siding. Sure we may have had a few snags and delays along the way, but we were rolling along, and that's all that really mattered.

  1. What kind of siding should we use?
  2. What additional tools will we need?
  3. How am I going to do the work all the way at the top of the house?
  4. Research replacement gutters

The single item remaining on our list was to research and determine a suitable new gutter solution.

Before we delve into this item on the list, let's take a step back to discuss how this critical element to our project was actually the catalyst for the entire siding endeavor, yet somehow we had left off even considering the gutter replacement until we had actually started the project.

Our home's roof configuration consists of a roughly 15' wide and 65' long slightly pitched to the rear layout that reduces to about 10' wide by the time it reaches the single rear gutter length. What this means is that all of the rainwater that falls on our home funnels to one short length of gutter at the back of our house. 

To complicate matters, when we first moved into the house in 2003, our gutter and our neighbor's gutter were combined in the middle, and all of the water from our roof and from our neighbor's roof of equal size came barreling down the roof towards the undersized 20' length of modern white aluminum gutter.

To make matters even worse, the gutters terminated not into a normal straight aluminum downspout, but rather into a tight 'S' of 3" PVC elbows and 20' length of 3" PVC. Less than ideal? That's an understatement.

Add to this wonderful debacle that the gutters lacked gutter screens at several locations, having been blown off and not replaced over the years. These gutters screens were rather critical given the two large trees hanging over the front of the roof. As one might expect, each fall the trees would begin dropping their leaves and debris on the roof, which was ultimately washed into the gutter in heavy rains, clogging the inappropriate PVC 'S' above the downspout. This resulted in carnage, misery, and disastrous waterfalls of ice down the back of our house, which ultimately resulted in Wendy, sitting and rocking in the fetal position at the thought of massive repair work both inside and outside of our house. 

Our home's previous owner "resolved" this clogged and leaking gutter situation by placing a large plastic bucket where the water was falling, along with a 10 pound weight in it to hold it in place. 

No, this didn't do anything to fix the leak. But apparently this was enough to keep the water from annoying the owner by tapping against the window as it dripped off the gutter. Yeah...that's an awesome solution.

See...less than ideal.

Have I painted a vidid enough picture of what this configuration resulted in? Oh, okay, here's the actual end result.

Through a rather fortunate twist of fate, the previous owner of our neighboring house, who had been initially opposed to the separation and replacement of the gutters, had a change of heart and had the gutters separated and a new gutter installed on the his house. While this took care of half the water coming off the roof, we still had our own half of the roof and the shoddy downspout construction and constant clogging to worry about. By the time we were ripping up the back of our house, the upper gutters had already been split.

When we began looking into a new downspout, my search led me to a larger volume gutter primarily because the old one would overflow even when not clogged. This search, and my research into old home gutters, ultimately led me to the desire to replace our modern gutter with a larger and even oversized historically accurate half round gutter.

If you're unfamiliar, half round gutters were a common gutter style on old homes. Their profile was simple, classic, and most importantly, easy to form using tools of the 19th and early 20th century.

More recently, die based metal forming tools allowed for fabricating of the newer style, or K style, of gutter that's intended to look more like crown molding than a water removal system, but I prefer the look of the old half round gutter on historic homes.

My extensive search led me to a copper gutter supplier I had seen on This Old House and in various old home publications. The company's name is Classic Gutter Systems, and they're out of Kalamazoo, Michigan. You really can't find a company name more properly suited to what I was looking to do.

Classic Gutter Systems offers a series of products that are historically accurate and DIYish friendly for the purchase and install of gutters that look and function great for historic properties. (They also have K style gutters, so as not to completely limit their market.)

After extensive research, deliberation, measuring, arguing, and concern over our ability to execute this project on our own, we decided to pull the trigger and order our replacement gutters.

We decided on a 6" style of half round copper gutters for both the upper and lower roof, as well as 4" copper downspouts and a few 40 degree angle pieces to replace the tragic 'S' that was constantly clogging. Oh, and also some gutter screens to keep the leaves and sticks from finding their way into our downspouts. The style we decided on looks very similar to this configuration.

Photo Credit: Cannon Copper

We also opted for a decidedly no-frills look on the hangers, end caps, and mounting straps. They have some pretty ornate designs, even including cast and sculpted gutter hangers in the shape of sea horses.

All told, the supplies for our historically accurate gutter project ran us about $1,000 including shipping. They were able to ship lengths of 10' in a structured boxes to protect the precious yet soft copper, and they all arrived in a freight carrier about two weeks after I placed the order. The cost of copper has gone up substantially since our order, so it'd be a bit more now, but I feel pretty good about the price we received at the time of our order.

And with that, our prerequisite checklist for our summer long siding project was complete. 

  1. What kind of siding should we use?
  2. What additional tools will we need?
  3. How am I going to do the work all the way at the top of the house?
  4. Research (and buy) replacement gutters

We had a backyard full of siding, a sun porch full of our tools and supplies, our scaffolding installed on the house, our gutters waiting patiently for install, and our plan for tackling the whole project. We were ready to get a move on, ready to tackle this project that we were mildly to very worried about doing right. You can see the box of copper gutters at the bottom middle of this photo.

What do you think about the gutters? Were we right to take the extra time and money to ensure an historically accurate look, or do you think we should have just gone with the big box K style gutters? What about material type? We love the look of the copper, but now, after having had it stolen from the side of our house, we're rethinking if we should have used something less valuable, like the white aluminum.

Comments 12

Comments

Polly
8/5/2013 at 1:59 PM
I swear, you guys are like an encyclopedia for all of the projects that my husband and I are hoping to tackle on the row house we're buying now.

I love the gutters that you chose and think they compliment your home well. Since the theft, have you considered any home alarm systems? A tech post on how to keep a home safe, while still keeping a historic aesthetic, would be very interesting.
Alex
8/6/2013
You have no idea how happy it makes me that you are finding our info useful. This is exactly why I always wanted to start our blog.
8/5/2013 at 4:05 PM
Every single house on my block that had copper downspouts has lost them. I can't imagine how this happens without anyone noticing so I'm convinced its spontaneous evaporation. I used aluminum on the large parts of the house and painted them to match. But on the front porch where it really shows, I used wood gutters (that hold about a thimble full of water) with round galvanized downspouts that look a little classier.
Alex
8/6/2013
I've always been intrigued by the integrated wood gutters with downspouts, either in zinc or copper. I have heard that many really don't hold very much. That's for sure.
Debra Gray Cripps
8/5/2013 at 7:10 PM
I'm just scared it will get stolen again!
Alex
8/6/2013
You and me both!
Melanie Allen
8/5/2013 at 9:54 PM
Yes the 1st, after they stole it.. Not sure, what I would have done, shortened the copper to drop into a disconnected but wider piece of PVC or concrete pipe
Alex
8/6/2013
I really don't see many other options for install over what we've done. Hopefully the copper thieves have been apprehended and won't be causing any more issues.
8/5/2013 at 11:40 PM
I love how particular you guys are about finding just the right thing. I think it's going to look fab. I am a tiny bit concerned about theft given what happened to you before, but at the same time, you should be able to do what you want to your home and not live in fear!!
Alex
8/6/2013
You're right, nobody can accuse us of taking shortcuts or not fully investigating our options.

I really do hope our replacement downspout doesn't get stolen, but as you said, you can't live in fear.
8/6/2013 at 1:44 PM
We used 6" half round aluminum gutters with round downspouts with a dark brown finish that looks similar to aged copper but about 1/3 the price. So far (knock on wood) no one has messed with them.

One advantage you guys have is your roof doesn't have a very steep pitch. When we bought our house, some bozo had replaced the original half rounds with 4" K gutters, which were way too shallow for the pitch of our roof. Every time we got a hard rain, we had Niagara Falls coming over the front of the house, which caused a lot of damage to the cedar shingles over the years. Shows that it's important to have a gutter that can handle the runoff that is pouring into it!
Alex
8/6/2013
There's nothing worse than watching a torrent of water pouring over an undersized gutter and in front of your windows. I've seen it first hand, and it makes me sick to my stomach.
Since you've not signed in yet, you will need to fill in your name and email below. If you have a Facebook account, save yourself a step and use Connect to login.

Denotes a required field.

Please enter full URL, including http://

You can use Markdown syntax in your comment. And you can also use lots of Emoji!
  • Search

  • Login
  • Follow
  • Advertising

If you're looking for information on advertising and sponsorships, head on over to our sponsorships page. You can purchase site sponsorships in a few easy clicks. 

Toolbox Tuesday
Open Housing
  • We're Featured!

Old Town Home has been featured in the following places and publications:

The Washington Post
 
Washingtonian Magazine
 
Domino
 
Old House Journal
 
 
Apartment Therapy House Tour
 
Washington Post Express Feature
 
Home & Garden Blogs
 
© 2024 OldTownHome.com. - Privacy Policy
Login Below
or
Sign in with Facebook
Connect

Unexpected Error

Your submission caused an unexpected error. You can try your request again, but if you continue to experience problems, please contact the administrator.

Working...

Working...