I've been doing some significant woodworking in some capacity for the last eight years, and some of the projects I've worked on are what many people would consider intermediate to advanced. One tool I've come to rely on quite extensively is my router gauge to measure my depth of cut. It was actually an impulse buy that I picked up while ordering a router bit set but I had no idea how much I would actually end up needing it.

When working with a router, circular saw, or table saw, you are often faced with situations where you must make cuts at a very specific depth. In these projects, the accuracy of your depth of cut will make or break the ultimate outcome of your work. If you're off by less than 1/32", you can end up with unsightly lines, weak joints, or a generally sloppy appearance that lacks uniformity.

If you have a good depth of cut gauge to help you ensure an accurate cut depth, it takes out a lot of the standard guess work, tons of extra test cuts, and ultimately saves you a lot of time in the wood shop.

This is another situation where a "keep it simple" philosophy will do quite well. There are depth of cut tools on the market that are digital, have sliding components, are tension mounted, or have the ability to check your email (ok, maybe I made up the least feature). Of all of the depth gauges I've used, the one that works best is a simple aluminum template with the various possible cut depths measured by 1/16" increments. I believe it may also be the least expensive option.

The package I'm suggesting also comes with a table saw gauge. I've been using my router gauge for the table saw, and it works well, but dado setup is more difficult because of the gauge's openings. I'm going to order this one so that I can get the table saw gauge as well. This should also help when I'm consistently misplacing my current gauge.

I can't overstate how important this tool has been. I use every time I want to make a dado or kerf cut, almost every time I setup the router, and whenever I want to double check the depth or width of a cut with something that I know won't make a mistake. Measure twice and cut once, but be even more confident in your measurements with this tool.

Do you have a good depth of cut gauges or method of ensuring accurate cuts? Let me know if you do, I'm interested to hear about them.

Comments 0

Comments

Since you've not signed in yet, you will need to fill in your name and email below. If you have a Facebook account, save yourself a step and use Connect to login.

Denotes a required field.

Please enter full URL, including http://

You can use Markdown syntax in your comment. And you can also use lots of Emoji!
  • Search

  • Login
  • Follow
  • Advertising

If you're looking for information on advertising and sponsorships, head on over to our sponsorships page. You can purchase site sponsorships in a few easy clicks. 

Toolbox Tuesday
Open Housing
  • We're Featured!

Old Town Home has been featured in the following places and publications:

The Washington Post
 
Washingtonian Magazine
 
Domino
 
Old House Journal
 
 
Apartment Therapy House Tour
 
Washington Post Express Feature
 
Home & Garden Blogs
 
© 2024 OldTownHome.com. - Privacy Policy

Unexpected Error

Your submission caused an unexpected error. You can try your request again, but if you continue to experience problems, please contact the administrator.

Working...

Working...